|
TD-101 |
TD-102 |
TD103 |
|
Twinax Hex 0.429
(10.90mm) 0.075
(1.90mm)
|
RG-6, RG-174,
Belden-
Type
RG8218 cables
Hex 0.324(8.23mm),
0.178 (4.52mm)
0.068 (1.73mm)
|
RG-58, RG-59/62,
BNC/
TNC
Coax Connectors
Hex, 0.255 (6.48mm),
0.213 (5.41mm),
0.068 (1.73mm)
|
|
TD-104 |
TD-105 |
TD-106 |
|
RG-174, Mini 59
BNC/
TNC
Connectors
Hex, 0.178 (4.52mm)
0.128 (3.25mm),
0.068 (1.73mm)
|
N-Series and RG-8/11
Connectors Hex, 0.429
(10.90mm), 0.100 (2.54mm),
0.080 (2.03mm)
|
RG-59, RG-6, and
8281,
50 and
75 ohm cables
Hex, 0.324 (8.23mm),
0.255 (6.48mm),
0.0068 (1.73mm),
0.042 (1.07mm)
|
|
TD-107 |
TD-108 |
TD-109 |
|
RG-59, RG-6
F-Type
CATV
Connectors
Hex, 0.350 (8.89mm),
0.320 (8.13mm),
0.255 (6.48mm)
|
RG-58, RG-174 and
RG-8281 for both
50
and 75 ohm cables
Hex 0.213 (5.41mm),
0.178 (4.52mm),
0.068 (1.73mm),
0.042 (1.07mm)
|
Plenum and
Non-Plenum
thinwire
Cables RG-58 and 59
Hex,
0.213 (5.41mm),
0.190 (4.83mm), 0.068
(1.73mm), 0.042 (1.07mm)
|
|
TD-110 |
TD-111 |
TD-112 |
|
Mini UHF and BNC / TNC 5
cavity Hex, 0.052 (1.32mm),
0.068 (1.73mm),
0.100 (2.54mm),
0.213 (5.41mm),
0.255 (6.48mm) |
Fiber-Optic SMA,
SMB
or SFR
connectors
Hex 0.151 (3.84mm)
0.178 (4.52mm),
0.213 (5.41mm)
|
AMP Combo RG-58,
RG-59/62
Dual Crimp
BNC/TNC Coax Connectors
Hex 0.208 (5.29mm),
0.240 (6.10mm),
0.44 (11.18mm)
0.052 (1.32mm) box center pin
|
|
TD-113 |
TD-114 |
TD-404 |
|
AMP thinwire Dual
Crimp
BNC
Coax Connectors
("0", 0.202) (5.13mm),
0.042 (1.07mm)
box center pin
|
AMP Optimate Fiber
Optic SMA or SFR
type connectors, Round
0.195 (4.95mm),
0.165 (4.19mm),
0.138 (3.51mm)
|
Handset die for four
position handset modular
plugs
|
|
TD-406 |
TD-406A |
TD-406D |
|
RJ-11 die set for two,
four or six position
modular plugs
|
RJ-11 AMP die set for two,
four or six position modular
plugs. Primary Strain
relief crimp bar is located
further back on die/modular
plugs.
|
RJ11 DEC MMJ die set
for six-position modular
plugs with an offset release
tab.
|
|
TD-408 |
TD-408A |
TD-410 |
|
RJ-45 eight position
die set for keyed or non
keyed modular plugs
(excluding AMP) |
RJ-45 AMP die set for
eight-position modular
plugs. Primary strain relief
crimp bar is located further
back on die / modular plug
|
RJ-45 die set for ten
position modular plugs |
